Posts

Showing posts from April, 2020

Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes

-
Image
Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes: -    Image-Hydro Test (Photo Credit: Ritesh Raj) (1.) Firstly, approved QAP will be checked.  (2.) ID marks should be marked on the inner and outer sides of pipes.  Image-ID Mark (Photo Credit: Ritesh Raj)  (3.) To check the inner and outer diameter of pipes.   (4.) Smooth finishing and before dispatch of RCC pipes cement slurry or grouting where required.   (5.) Load test is required for RCC pipes as per IS codes. It is different for each dia, of RCC pipes.  Image-Plate Load Test (Photo Credit: Ritesh Raj)   (6.) Concrete mix design checked and in which cement content, cement brand, and water-cement ratio should be checked.  (7.) The straightness test to be checked of RCC pipes through the straightness rods to collinear visible.   (8.) As per requirement 2% of hydro tests are to be checked as IS:458 of the total ordered quantity.  Image-Hydro Test (Pressure Release) (Photo Credit: Ritesh Raj)  
Post a Comment
Read more

"Description of Steel"

-
Image
                  Technical name of reinforcement is known as steel. Steel reinforcement is commonly known as ‘rebars’. Image Source:Pexels.com Types of Steel    -   (1.) Mild Steel-----FE 250, FE 415, FE 500 & FE 550                               (2.) Prestressed Bar                               (3.) Hot Rolled Deformed Bar                               (4.) Cold Worked Steel                                                                                                                     Recent Post: An introduction of civil engineering Image Source:Pexels.com Prefer IS Codes - (A.) IS: 800-----------General Construction of Steel                               (B.) IS: 1786---------Specification of HYSD Bar                               (C.)IS: 2502----------Bending & fixing of bars for concrete reinforcement                               (D.)IS: 432-----------Specification Of mild steel & medium tensile steel
Post a Comment
Read more

An Introduction of Civil Engineering

-
Image
                     Civil Engineering is the only one that type of engineering, in which an illiterate person to literate person works. In present digital life and technology sinerio, no any other sector is available where an illiterate person is work and easily survives their life.                        Image Source:Pexels.com   It is a one of that industry, where a person can imagine and make reality on the ground level. Site engineers spend time visiting project sites, meeting with stakeholders and preparing construction Plan. Civil Engineering is the oldest branch of engineering. Architecture is also born from Civil Engineering. It deals with design, construction and maintenance of the physical and naturally build environment. Image Source:Pexels.com Civil Engineer is connected with respective person/contractor for required structure and monitoring the all construction process till end of the project and these structures is guaranteed after completion with refere
Post a Comment
Read more

Popular posts from this blog

"Sewer Network Analysis"

-
Image
The word sewerage is made from sewer. The word sewer indicates the usable water which is received from kitchen, bathroom and outfall from toilet/W.C. Every large or small city was held at sea, river and lake and it was planned at initial stage of the project planning, that the dirty water of homes and industries was dumped in that water source easily. Many years passed the dirty water from these utilities are dumped in the nearest source and that source water was make too poisons. Many aquatic life is survive in water and when dirty water is mixed with water source the biological cycle was affected and fishes and other animals population was decreases. Image Source:Pexels.com In that case population of human is also increases continuously and after that level of water source was decreases and we faced many problems continuously. Then sewer network is introduced. Outlet from all homes are connected to lateral lines means the water of kitchen, bathroom and water closet are co
Read more

Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes

-
Image
Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes: -    Image-Hydro Test (Photo Credit: Ritesh Raj) (1.) Firstly, approved QAP will be checked.  (2.) ID marks should be marked on the inner and outer sides of pipes.  Image-ID Mark (Photo Credit: Ritesh Raj)  (3.) To check the inner and outer diameter of pipes.   (4.) Smooth finishing and before dispatch of RCC pipes cement slurry or grouting where required.   (5.) Load test is required for RCC pipes as per IS codes. It is different for each dia, of RCC pipes.  Image-Plate Load Test (Photo Credit: Ritesh Raj)   (6.) Concrete mix design checked and in which cement content, cement brand, and water-cement ratio should be checked.  (7.) The straightness test to be checked of RCC pipes through the straightness rods to collinear visible.   (8.) As per requirement 2% of hydro tests are to be checked as IS:458 of the total ordered quantity.  Image-Hydro Test (Pressure Release) (Photo Credit: Ritesh Raj)  
Read more

Methodology for Trenchless Piping by Jack Pushing Method

-
Image
  Methodology for Trenchless Piping by Jack Pushing Method                       Work Under Pit (Photo Credit: Ritesh Raj) 1.0 Purpose: The Purpose of this procedure is to lay guidelines, requirement and to establish a method or a system to control the open cutting & trenchless activity.   2.0 Scope : The Scope of the works covers the laying of RCC Pipe NP4 of 1000mm diameter on LHS of NH (NH No. will be mention) Road from (Chainage 1) to (Chainage 2) by using Trenchless Jack Pushing method.  Also Read: Initial Setting Time of Cement 3.0 Methodology: 3.1 Survey Alignment of Pipe Line to be marked from the position of Manhole to Manhole which is to be constructed. 3.2 List of Manpower: ·          Engineer                                   - As per Requirement ·          Safety Officer                           - As per Requirement ·          Supervisor                                - As per Requirement ·          Excavator Operator                   -
Read more