Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes

-
Image
Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes: -    Image-Hydro Test (Photo Credit: Ritesh Raj) (1.) Firstly, approved QAP will be checked.  (2.) ID marks should be marked on the inner and outer sides of pipes.  Image-ID Mark (Photo Credit: Ritesh Raj)  (3.) To check the inner and outer diameter of pipes.   (4.) Smooth finishing and before dispatch of RCC pipes cement slurry or grouting where required.   (5.) Load test is required for RCC pipes as per IS codes. It is different for each dia, of RCC pipes.  Image-Plate Load Test (Photo Credit: Ritesh Raj)   (6.) Concrete mix design checked and in which cement content, cement brand, and water-cement ratio should be checked.  (7.) The straightness test to be checked of RCC pipes through the straightness rods to collinear visible.   (8.) As per requirement 2% of hydro tests are to be checked as IS:458 of the total...
Post a Comment

List of Important IS Codes

-

Below mentioned IS Codes is most important for those persons who are working in construction industry.These IS Codes is also helpful during execution, testing of materials and also for interview. Freshers and experienced person will get benefits through it.

Please remember these codes, it will definitely helpful.


Image Source:Pexels.com

   Ø  IS: 269-----------Specifications for 33 grade OPC (Ordinary Portland Cement)

Ø  IS: 8112---------Specifications for 43 grade OPC (Ordinary Portland Cement)

Ø  IS: 12269--------Specifications for 53 grade OPC (Ordinary Portland Cement)

Ø  IS: 456-----------Code of practice for plain and reinforced concrete.

Ø  IS:457------------Code of practice for general construction of plain and
                                reinforced concrete for dams & other massive structures

 Also Read:Civil Engineering Technical Terms

                      
Ø  IS: 383-----------Specifications for fine & coarse aggregate from natural sources for concrete
Ø  IS: 2386----------Methods of tests for aggregate for concrete

Ø  IS: 1199----------Methods of sampling and analysis of concrete

Ø  IS: 2430----------Methods of sampling
Image Source:Pexels.com


Ø  IS: 4082----------Specifications for storage of materials.

Ø  IS: 2250----------Compressive strength test for cement mortar cubes. 
                                
Ø  IS: 455 -----------Specifications for PSC (Portland slag cement)

Ø  IS: 1489----------Specifications for PPC (Portland pozzolana cement).

Ø  IS: 8041----------Specifications for RHPC (Rapid Hardening Portland cement)

Ø  IS: 12330---------Specifications for SRPC (sulphate resistant portland cement)

Ø  IS: 4031----------Chemical analysis and tests on cement.

Ø  IS: 516------------Methods of test for strength of concrete.

Ø  IS: 13311---------Ultrasonic testing of concrete structures

Ø  IS: 4925----------Specifications for concrete batching plant.

 Also Read:A beautiful Journey of a Construction Industry        
  
Image Source:Pexels.com

Ø  IS: 3025----------Tests on water samples

Ø  IS: 4990----------Specifications for plywood form work for concrete.

Ø  IS: 9103----------Specifications for concrete admixtures.

Ø  IS:9013-----------Method of making,curing and determining comp. strength of accelerated cured                                         concrete test specimen

Image Source:Pexels.com

Ø  IS:10262, SP 23-Recommended Guide Lines for Concrete Mix Design  

Ø  IS: 12200---------Specifications for PVC (Polyvinyl Chloride) water bars.

Ø  IS: 1077-----------Specifications for bricks for masonry work.

Ø  IS: 1786----------Cold-worked HYSD steel rebars (grade Fe415 & Fe500).

Ø  IS: 1785----------Specifications for plain hard drawn steel wire fabric for prestressed concrete.

Ø  IS: 12118--------Specifications for Polysulphide sealants

Ø  IS: 650------------Standard sand testing of cement

 Ø  IS:15058---------Code of practice for the provision of water stops                                                                                         

 Also Read:List of Construction Companies in India

 Ø  IS:1786-----------Specifications for HYSD bars

 Ø  IS:432------------Specification for Mild Steel and Medium Tensile steel bars

 Ø  IS:2502----------Code of practice for bending & fixing of bars for concrete reinforcement

 Ø  IS:2505----------Specification for concrete vibrators, immersion type

 Ø  IS:2720----------Grain size analysis

Image Source:Pexels.com

Ø  IS:303------------Specification for plywood for general purposes

 Ø  IS:2645-----------Specification for integral cement water proofing compound

 Ø  IS:1791-----------Specification for batch type concrete mixers


Image Source:Pexels.com


Has this page been helpful to you? If yes, please mention in the comment box.
Thanks for visiting this site.


Written By- 
Ritesh Raj
Email Id-rajritesh.motiharirr@gmail.com











Comments

Post a Comment

If you have any suggestions and doubts please let me know.

Popular posts from this blog

"Sewer Network Analysis"

-
Image
The word sewerage is made from sewer. The word sewer indicates the usable water which is received from kitchen, bathroom and outfall from toilet/W.C. Every large or small city was held at sea, river and lake and it was planned at initial stage of the project planning, that the dirty water of homes and industries was dumped in that water source easily. Many years passed the dirty water from these utilities are dumped in the nearest source and that source water was make too poisons. Many aquatic life is survive in water and when dirty water is mixed with water source the biological cycle was affected and fishes and other animals population was decreases. Image Source:Pexels.com In that case population of human is also increases continuously and after that level of water source was decreases and we faced many problems continuously. Then sewer network is introduced. Outlet from all homes are connected to lateral lines means the water of kitchen, bathroom and water closet are co...
Read more

Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes

-
Image
Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes: -    Image-Hydro Test (Photo Credit: Ritesh Raj) (1.) Firstly, approved QAP will be checked.  (2.) ID marks should be marked on the inner and outer sides of pipes.  Image-ID Mark (Photo Credit: Ritesh Raj)  (3.) To check the inner and outer diameter of pipes.   (4.) Smooth finishing and before dispatch of RCC pipes cement slurry or grouting where required.   (5.) Load test is required for RCC pipes as per IS codes. It is different for each dia, of RCC pipes.  Image-Plate Load Test (Photo Credit: Ritesh Raj)   (6.) Concrete mix design checked and in which cement content, cement brand, and water-cement ratio should be checked.  (7.) The straightness test to be checked of RCC pipes through the straightness rods to collinear visible.   (8.) As per requirement 2% of hydro tests are to be checked as IS:458 of the total...
Read more

"Solar Power System"

-
Image
When the energy received by earth from the sun is known as “solar energy”. Solar energy is comes under renewable energy. Solar radiation is the utilized by the solar plates for further use. The working procedure of solar system is capture, convert and then distribution. Image Source:Pexels.com Solar system is categorized in two parts:- (1.)   Passive Solar: -   In this system the selected material have light dispersion properties and designing spaces that the circulate air naturally. This system reduces the need for alternative resourcs and generally focuses on demand side technologies. (2.)   Active Solar:- This system is based on photovoltaic modules (i.e. also known as photovoltaic panels) and collectors of solar thermal system to convert sun light into their useful output. Its increases the supply of energy. Image Source:Pexels.com Recent Post: Different energy sources Working Procedure:- In this system with the u...
Read more