Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes

-
Image
Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes: -    Image-Hydro Test (Photo Credit: Ritesh Raj) (1.) Firstly, approved QAP will be checked.  (2.) ID marks should be marked on the inner and outer sides of pipes.  Image-ID Mark (Photo Credit: Ritesh Raj)  (3.) To check the inner and outer diameter of pipes.   (4.) Smooth finishing and before dispatch of RCC pipes cement slurry or grouting where required.   (5.) Load test is required for RCC pipes as per IS codes. It is different for each dia, of RCC pipes.  Image-Plate Load Test (Photo Credit: Ritesh Raj)   (6.) Concrete mix design checked and in which cement content, cement brand, and water-cement ratio should be checked.  (7.) The straightness test to be checked of RCC pipes through the straightness rods to collinear visible.   (8.) As per requirement 2% of hydro tests are to be checked as IS:458 of the total ordered quantity.  Image-Hydro Test (Pressure Release) (Photo Credit: Ritesh Raj)  
Post a Comment

List of Registers And Formats

-




Image Source:Pexels.com



  I am presenting here some lists of registers, formats and tests details which is conducted in the initial stages of any construction sites of the respective projects and it will continue further.Some tests will also add in it in future as per client requirement.

 Different project have different format , but their content  will never changes.Test frequency will depends upon FQP (Field Quality Plan), IS Code-4926 and MORTH guidelines.  
With the help of following mentioned content, you can remove difficulties which will comes initial stages of the starting of the project:-


LIST OF REGISTERS (FOR QUALITY PURPOSE)
Sl. No.
Name Of Register
1
Cube Test Register
2
Slump Cone Test Register


Also Read:List of Important IS Codes
                     
LIST OF REGISTERS (OTHER REGISTERS)
Sl. No.
Name of Register
1
Site Order Book
2
Hinderence Register
3
Weekly Meeting Register
4
Daily Monitoring Register
5
Grievance Register
6
Excavation Details Register
7
Disposal Of Soil Register
8
Stock Register

    
LIST OF FORMATS (FOR QUALITY PURPOSE)
Sl. No.
Name of Formats
1
Test for bulking of sand
2
Test Certificate for sand (Gradation/ Sieve Analysis)
3
Water certificate for construction water
4
Test certificate for Bricks
5
Aggregate impact  value test
6
Flakiness & Elongation test
7
Gradation/Sieve analysis of 20 mm
8
Gradation/Sieve analysis of 10 mm
9
Moisture content test
10
Water absorption test /Specific Gravity Test
11
Backfilling (Soil compaction test)
12
MDD/OMC Test
13
GSB Gradation Test



LIST OF TESTS (CONDUCTED BY THIRD PARTY)
1
Drinking Water Test
2
Construction Water Test
3
Ambient Air Test
4
Ambient Noise Test
5
 Soil Test
  



Image Source:Pexels.com


Has this blog been helpful to you? If yes, please mention in the comment box.

Thanks for visiting this site.



Written By- 
Ritesh Raj
Email Id-rajritesh.motiharirr@gmail.com






Image Source:Pexels.com
      





Comments

Post a Comment

If you have any suggestions and doubts please let me know.

Popular posts from this blog

"Sewer Network Analysis"

-
Image
The word sewerage is made from sewer. The word sewer indicates the usable water which is received from kitchen, bathroom and outfall from toilet/W.C. Every large or small city was held at sea, river and lake and it was planned at initial stage of the project planning, that the dirty water of homes and industries was dumped in that water source easily. Many years passed the dirty water from these utilities are dumped in the nearest source and that source water was make too poisons. Many aquatic life is survive in water and when dirty water is mixed with water source the biological cycle was affected and fishes and other animals population was decreases. Image Source:Pexels.com In that case population of human is also increases continuously and after that level of water source was decreases and we faced many problems continuously. Then sewer network is introduced. Outlet from all homes are connected to lateral lines means the water of kitchen, bathroom and water closet are co
Read more

Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes

-
Image
Important Points SOP (Standard Operating Procedure) During the Inspection of RCC NP4 Pipes: -    Image-Hydro Test (Photo Credit: Ritesh Raj) (1.) Firstly, approved QAP will be checked.  (2.) ID marks should be marked on the inner and outer sides of pipes.  Image-ID Mark (Photo Credit: Ritesh Raj)  (3.) To check the inner and outer diameter of pipes.   (4.) Smooth finishing and before dispatch of RCC pipes cement slurry or grouting where required.   (5.) Load test is required for RCC pipes as per IS codes. It is different for each dia, of RCC pipes.  Image-Plate Load Test (Photo Credit: Ritesh Raj)   (6.) Concrete mix design checked and in which cement content, cement brand, and water-cement ratio should be checked.  (7.) The straightness test to be checked of RCC pipes through the straightness rods to collinear visible.   (8.) As per requirement 2% of hydro tests are to be checked as IS:458 of the total ordered quantity.  Image-Hydro Test (Pressure Release) (Photo Credit: Ritesh Raj)  
Read more

"Solar Power System"

-
Image
When the energy received by earth from the sun is known as “solar energy”. Solar energy is comes under renewable energy. Solar radiation is the utilized by the solar plates for further use. The working procedure of solar system is capture, convert and then distribution. Image Source:Pexels.com Solar system is categorized in two parts:- (1.)   Passive Solar: -   In this system the selected material have light dispersion properties and designing spaces that the circulate air naturally. This system reduces the need for alternative resourcs and generally focuses on demand side technologies. (2.)   Active Solar:- This system is based on photovoltaic modules (i.e. also known as photovoltaic panels) and collectors of solar thermal system to convert sun light into their useful output. Its increases the supply of energy. Image Source:Pexels.com Recent Post: Different energy sources Working Procedure:- In this system with the use of photovol
Read more